Liebherr LTM11200-9.1 Mobile Crane Yellow Scale Diecast Model

Home
Model Cranes
Liebherr LTM11200-9.1 Mobile Crane Yellow

Liebherr LTM 11200-9.1 Mobile Crane

SCALE: 1:50
TYPE: Diecast / multi-material

FUNCTIONS:

Telescoping 8 section boom
Rotating carbody
9 steerable axles
Pivoting operator cab
Removable safety railings
Functional hydraulic cylinders
Key operated drums that operate the Y-Guy attachment and winches
Pivoting outriggers with removable pads
Y-Guy assembly with supplied nuts and bolts
Assembly of lattice boom sections with supplied nuts and bolts
Functional sheaves
Removable counterweights
Rotating wheels

FEATURES:

Accurate Y-Guy design
Detailed electrical and hydraulic line placement
Accurate boom detail
Replicated outrigger pads
Accurate decal placement
Accurate carbody detail
Accurate rear view mirrors
Detailed hose, cable and hydraulic line placement
Accurate 5 section lattice boom detail
Accurate storage compartment and engine compartment detail
Accurate engine intake and exhaust ports
Simulated cab guard
Accurate catwalks and walkways with anti-slip detail
Detailed operator and driver cab with operating levers, and computer monitor
Accurate decal placement
Work and safety lighting
Rubber tires

MODEL DIMENSIONS:

Length of carbody, 18
Width of carbody with outriggers retracted, 60mm
Width of carbody with outriggers extended, 286mm
Height of carbody in travel position, 94mm
Length of boom, retracted, 15
Length of boom, extended, 85.625

BOX DIMENSIONS:

Box length, 20
Box width, 254mm
Box height, 254mm

Detailed operator cab

Liebherr LTM11200-9.1 Mobile Crane Yellow

Removable counterweights

Functional hydraulic cylinders

Assembly of lattice boom sections

Pivoting outriggers

Accurate Y-Guy design

Find Similar Products by Category

Model Cranes

Product Reviews

Showing reviews 1-10 of 17 | Next

Important parts missing

Posted by Richard Gagne on 25th Mar 2013

My Kit contained four telescope feet for the outrigger of the boom plus two spare parts..
And one on four telescope feet for the outrigger of the truck was missing…
The telescope feet for the boom and the truck are not interchangeable.
I’m a little bit disappointed
Wicked crane

Posted by Unknown on 17th Mar 2013

This model looks great. Awesome show piece. Takes up a lot of room but I highly recommend it. Only troubles I had with it are the 4 self tapping screws for the luffing jib winch. This is a must have for any model collector.
Best crane model

Posted by Justin Partain on 30th Jan 2013

I have over 15 cranes the 11200 is the most detailed crane I have and it will hold over 15lb I would not recommend this but it can do it
EXCELLENT MODEL

Posted by American Logger on 25th Sep 2012

After purchaseing my first one i purchased 2 more, i have to say this is by far the best crane i own.

a excellent crane for the dollar too.
Pleasantly surprised

Posted by Joe G. on 18th Sep 2012

Pretty much like others have said. This was my first experience with NZG and reading the reviews comparing it to TWH and looking at smaller models at hobby shops, which were probably older castings that held the standards of some years ago, I was assured by Mr. Neumann that I wasn't going to be disappointed. He was right. Although there are some places in which you know other manufacturers have paid greater attention, it doesn't detract from the overall rating of the model.
The model is quite heavy and solid, the drivetrain is very detailed, the in-casting detail is good, and the engineering of the model, at the steering, booms, outriggers and winch reels is very good. Some collectors might not like the system NZG uses to keep the model together, as NZG uses nuts and bolts that you fasten using tiny wrenches that com with the model, but if you're like me, a modeler and not just a collector, you'll appreciate the versatility this system gives you. You can pose the model in so many ways, and collectors with little space will like this feature. Excellent rendition of an awesome crane that astonishes even those unfamiliar. Good work, NZG.

And this is the best place to get it: www.diecastmodels.co
Very nice model crane

Posted by Jake on 20th Aug 2012

At first I was kind of hesitating to make this purchase do to not liking NZG models but I was pleasantly surprised so much so that I purchased another one . Very well made as far as mechanical it's great and for the price you cannot even touch the quality . I highly recommend this model and trust me before I received mine I would of sworn that I would never purchase another NZG model.
Amazing

Posted by Tom H. on 20th Aug 2012

This is my second 11200 (also have Roxu) Incredibly detailed model Well worth the dollars. Great addition to anyone crane collection. Just buy it.
Huge Model

Posted by Tom on 9th Aug 2012

This crane is huge. I have not rigged it yet but have assembled and extended the boom. The detail is outstanding but like a previous review, it is not the same as a TWH model. Having said that, I must also say this model is a must for any crane collector. With the jib extension this model is taller than many people's ceilings. Mine will have to be displayed in the travel mode unfortunately. The only negative would be the instructions, which could be a little more thorough. If you collect cranes, don't miss this one!
Most realistic model

Posted by Justin on 7th Aug 2012

I'm a Operater rigger and this crane is just like the real crane I would buy this crane over and over really one of the best in my fleet
Wow love this crane!!

Posted by Manuel on 3rd Aug 2012

I just got mine to day wow it is awesome. if your thinking about it don't wait to long! im thinking of getting a second one. The detail is second to none. This model is by far my heaviest one. it is well worth the money...